GIRA_217400

English

Селекция на CAD модел

	All
	Electro

HELP_VARIABLE


Company	Gira
Description	GIRA_217400
Bill of material	GIRA_217400
ORDERNO	GIRA_217400
BUS_CONNECTION_INCLUDED bus connection included	1
BUS_CONNECTION_INCLUDED_YESNO bus connection included yesno	1
BUS_SYSTEM_KNX bus system knx	1
BUS_SYSTEM_KNX_RADIO bus system knx radio	0
BUS_SYSTEM_KNX_RADIO_YESNO bus system knx radio yesno	0
BUS_SYSTEM_KNX_YESNO bus system knx yesno	1
BUS_SYSTEM_LON bus system lon	0
BUS_SYSTEM_LON_YESNO bus system lon yesno	0
BUS_SYSTEM_POWERNET bus system powernet	0
BUS_SYSTEM_POWERNET_YESNO bus system powernet yesno	0
BUS_SYSTEM_RADIO_FREQUENT bus system radio frequent	0
BUS_SYSTEM_RADIO_FREQUENT_YESNO bus system radio frequent yesno	0
COST cost	0
CUT_WITH_VOIDS_WHEN_LOADED cut with voids when loaded	0
DEFAULT_ELEVATION default elevation	1219.200
DEGREE_OF_PROTECTION__IP_ degree of protection (ip)	IP20
DEGREE_OF_PROTECTION__IP__TEXT degree of protection (ip) text	IP21
DESCRIPTION description	Dimm.act.4g 4x250W VA DRA KNX,KNX dimming actuator, 4-gang,4 x 250 W VA,DRA plus,Features:,- Dim actuator with integrated bus coupler.,- Switching and dimming of light bulbs, HV halogen lamps, dimmable HV-LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or NV-LED lamps, dimmable electronic transformers with LV halogen or NV-LED lamps.,- Automatic or manual selection of dimming principle according to load.,- Idle-state, short-circuit, and excess temperature-proof,- Manual actuation of the outputs independent of the bus (building site operation also possible).,- Several outputs can be wired in parallel to increase output power.,- Parallel switching of several outputs to a load of 950 W possible. Do not connect LED or compact fluorescent lamps to dimming outputs connected in parallel.,- Building site operation: Outputs can be operated manually without bus voltage with operating voltage only.,Functions:,- Central switching function for control of all dimming channels.,- Delay for actively transmitted feedback messages following bus voltage recovery.,- Load type and dimming method can be configured: Universal (with automatic calibration procedure), electronic transformer LV LED (capacitive phase cut), conventional transformer LV LED (inductive phase cut), HV LED (phase cut) or HV LED (phase cut).,- Feedback for switching" and "brightness value".,- Dimmable brightness range can be set.,- Dimming behaviour and dimming characteristics can be parameterised.,- Switch-on behaviour for a relative dimming command can be parameterised.,- Bulb-saving switch-on and switch-off,- Automatic setting and scaling of the dimmable brightness range when using universal power boosters.,- The performance of a dimming channel in the "OFF" state during reception of a relative dimming command can be parameterised (switching and dimming or no response).,- Alarm telegrams for short circuit, overload, and load failure.,- Feedback of connected load type.,- Block function or forced setting function can be parameterised for each output.,- Time functions (switch-on off delay, staircase light function).,- Staircase light function with advance warning function via time-controlled reduction of lighting or activation of permanent lighting.,- Linking function and up to eight scenes per dimming channel possible.,- Elapsed operating time meter for recording switch-on time.,- Reactions after bus voltage failure and recovery can be set.,,Notes :,- Power extension using Gira power boosters.,- Installation on DIN top-hat rail.,- VDE approval in accordance with EN 60669-1, EN 60669-2-1."
DESIGN_OPTION design option	-1
GTIN gtin	4010337082224
HAN han	217400
HOST host	5
LOCAL_OPERATION_HAND_OPERATION local operation/hand operation	1
LOCAL_OPERATION_HAND_OPERATION_YESNO local operation/hand operation yesno	1
MAINTAIN_ANNOTATION_ORIENTATION maintain annotation orientation	0
MANUFACTURER manufacturer	Gira
MASSUNIT massunit	1
MAX__NUMBER_OF_VENETIAN_BLIND_OUTPUTS max. number of venetian-blind outputs	8
MODEL model	Dimming actuator
MOUNTING_METHOD mounting method	DRA (DIN-rail adapter)
MOUNTING_METHOD_TEXT mounting method text	DRA (DIN-rail adapter)
NUMBER_OF_OUTPUTS_NUMBER number of outputs number	4
OTHER_BUS_SYSTEMS other bus systems	None
OTHER_BUS_SYSTEMS_TEXT other bus systems text	None
PART_TYPE part type	0
ROOM_CALCULATION_POINT room calculation point	0
ROUND_CONNECTOR_DIMENSION round connector dimension	1
SHARED shared	0
SUBSTATION_INPUT_YESNO substation input yesno	0
TYPNAME typname	Dimm.act. 4-g 4 x 250 W/VA KNX DRA
URL url	https://www.gira.de/
VERSION version	2017
WIDTH_IN_NUMBER_OF_MODULAR_SPACINGS width in number of modular spacings	8
WIDTH_IN_NUMBER_OF_MODULAR_SPACINGS_NUMBER width in number of modular spacings number	8
WITH_LED_INDICATION with led indication	0
WITH_LED_INDICATION_YESNO with led indication yesno	0
NAME name	GIRA_217400

Не се поддържат бисквитки на трети страни

GIRA 217400